|Top Cutterhead Motor||20 HP / 25 HP|
|Bottom Cutterhead Motor||15 HP / 20 HP|
|Feeding Motor||3 HP|
|Elevation Motor||1/2 HP|
|Maximum Working Width||635 mm (25")|
|Maximum Working Thickness||200 mm (8")|
|Minimum Working Thickness||10 mm|
|Maximum Working Length||310 mm|
|Numbers of spiral Knife||164 pcs|
|Knife Size||TCT 15 x 15 x 2.5 mm|
|Cutterhead Speed||5000 RPM|
|Feeding Speed||7 - 20 M/min|
|Machine Dimensions||(L)2667 x (W)1145 x
|Machine Net Weight||3000 kgs|
|Machine Packing Dimensions||(L)2767 x (W)1245 x
|Machine Gross Weight||3500 kgs|
|* All specifications and design characteristics shown in this catalogue are subject to change
HEAVY DUTY HELICAL CUTTERHEAD (OPTIONAL)
This series of cutterhead features a specially designed cutting angle providing low cutting resistance, low noise and high productivity even when the cutterhead is applied on a low horsepower machine.
DIGITAL POSITION CONTROLLER
Thickness of cut can be set by the optional digital positional controller, providing high accuracy thickness control.
The machine employs an automatic lubricator for delivering oil to the Caterpillar chain slideways. This not only ensures smooth running of the Caterpillar chain at all times, but also prevents its damage due to forgetting manual lubrication.
THICKNESS SETTING BY SAMPLE
Thickness of cut can be set by using a wood block with the thickness the same as the product. It combines with the limit switch control for convenient and fast thickness setting.
CONVENIENT KNIFE SETTING
The bottom cutterhead can be pulled out from the side. When setting knives is required, simply pull the cutterhead for convenient and fast knife setting.
STRAIGHT KNIFE CUTTERHEADS (STANDARD ACCESSORIES)
The machine is equipped with straight-knife cutterheads as standard accessories. Each cutterhead is fitted with four straight knives.