DOUBLE SIDE PLANER (雙面鉋)

YA Series / YA-610AD

YA-610AD

 

  • Sectional infeed roller and pressure plate handle workpieces with thickness variation.
  • The table is hard chrome plated and precision ground providing a smooth feeding effect and maximum wear resistance.
  • Y-delta motor starting.
  • The infeed pressure device features overlap layout (optional), without clearance, ensuring uniform feeding pressure. Also allows for feeding narrow workpieces.
  • The two feeding systems have overload protection devices to avoid machine damage.
  • The cutterheads run on SKF bearings for dependable running performance and long bearing life.
  • Automatic lubricator delivers oil to conveyor and chain.
  • Sepcific chain oil is suggested.

 

 SPECIFICATIONS

 

MODEL YA-610A
Top Cutterhead Motor 15 HP / 20 HP
Bottom Cutterhead Motor 10 HP / 15 HP
Feeding Motor 3 HP
Elevation Motor 1/2 HP
Maximum Working Width 610 mm (24")
Maximum Working Thickness 200 mm (8")
Minimum Working Thickness 0 mm
Maximum Working Length 310 mm
Numbers of spiral Knife 4 pcs
Knife Size 610 x 6.35 x 38 mm
(24" x 1/4" x 1 1/2")
Cutterhead Speed 4000 RPM
Feeding Speed 7 - 20 M/min
Machine Dimensions (L)2750 x (W)1145 x
(H)1720 mm
Machine Net Weight 3000 kgs
Machine Packing Dimensions (L)2767 x (W)1245 x
(H)1870 mm
Machine Gross Weight 3500 kgs
* All specifications and design characteristics shown in this catalogue are subject to change
   without notice.

 

 

HEAVY DUTY HELICAL CUTTERHEAD (OPTIONAL)
This series of cutterhead features a specially designed cutting angle providing low cutting resistance, low noise and high productivity even when the cutterhead is applied on a low horsepower machine.

  • HELICAL CUTTERHEAD (OPTIONAL)
    The helical cutterhead is precision machined by a machining center for high accuracy cutting performance. It requires a light cutting load, minimum power consumption and is low noise.
  • The helical cutterhad is fitted with throw-away type carbide knife inserts.
  • Fully avoids wood tearing when cutting.

DIGITAL POSITION CONTROLLER
(OPTIONAL)
Thickness of cut can be set by the optional digital positional controller, providing high accuracy thickness control.

 

AUTOMATIC LUBRICATOR
The machine employs an automatic lubricator for delivering oil to the Caterpillar chain slideways. This not only ensures smooth running of the Caterpillar chain at all times, but also prevents its damage due to forgetting manual lubrication.

THICKNESS SETTING BY SAMPLE
Thickness of cut can be set by using a wood block with the thickness the same as the product. It combines with the limit switch control for convenient and fast thickness setting.

  • CONVENIENT BELT TENSION ADJUSTMENT
    The fully open belt guard provides added convenience for belt tension adjustment.
  • Employs oil and heat resistant belt.

  • CONVENIENT KNIFE SETTING
    The bottom cutterhead can be pulled out from the side. When setting knives is required, simply pull the cutterhead for convenient and fast knife setting.

    STRAIGHT KNIFE CUTTERHEADS (STANDARD ACCESSORIES)
    The machine is equipped with straight-knife cutterheads as standard accessories. Each cutterhead is fitted with four straight knives.